Thread: ct70 completely rebuilt motor at 95cc [SOLD]

Still Available!

Here is a completely rebuilt Honda CT70 motor with some performance mods. This was broken completely down, cleaned, and inspected and everything that needed to be replaced was.

It is essentially a new motor at this point with the following specs
54mm high compression piston and aluminum cylinder making 95cc.
Dratv 6mm high lift cam and port cleanup.
Heavy duty cam springs
New clutch discs and heavy duty springs
Honda Passport constant mesh kickstart unit (much better)
Rebuilt stator (new points, condensor, and coils)
New seals, gaskets
2 new transmission bearings
New cam roller, rebuilt oil pump

This will mount and go right in your CT70 or z50 or any of the honda minis. I'd guess that this motor, properly geared, carbed, and exhausted, should get ya to 55-60mph.

I want $450 plus shipping for this one. The oil cooler takeoff is not included for that price...I will include a regular plate there.

I also have a used mikuni VM20 carb and matching intake that I could include for $50 and put in jets to match. I can also include a few others to make sure you get it just right.

For another $50, I can include an oil cooler and the oil cooler takeoff plate but you'll need to get your own lines for it.

PM me or email at jarred dot markel at gmail dot com.

Ok...here are some pictures dressed with carb, intake, and cooler.

Will consider offers too...

Would you be interested in taking another ct70 motor as partial trade? Its off an '80s bike and does run, the carb is probably junk and it is a little rough but it starts in a couple of kicks and runs fairly well. I have no clue how much this stuff is worth but this may be a better deal for me instead of trying to rebuild my self.

Let me know, I am very interested in this motor.

Originally Posted by gsharp

Would you be interested in taking another ct70 motor as partial trade? Its off an '80s bike and does run, the carb is probably junk and it is a little rough but it starts in a couple of kicks and runs fairly well. I have no clue how much this stuff is worth but this may be a better deal for me instead of trying to rebuild my self.

Let me know, I am very interested in this motor.

Sorry man...I have done my last rebuild. Not because I don't like doing them...but I need to devote more time to other things like riding my bikes and working on the house and updating my jeep so my daughter can actually ride in it.

You could always buy this motor and break yours down to learn all about them and rebuild it as you have time as a little project.

Its also on ebay now as an FYI. check seller j-rod6

Bump. Anyone want to throw some offers out there?

Im intrerested in one of your motors,Its just a fun bike not streetable and had plans to rebuild when all the other projects slow down,and you know haw that goes,the 88cc comes with carb,wiring and key coorrect,how much for the carb setup on this 95cc,Im kinda on a budget due to surgury bills after spill

Originally Posted by knucklebuster2

Im intrerested in one of your motors,Its just a fun bike not streetable and had plans to rebuild when all the other projects slow down,and you know haw that goes,the 88cc comes with carb,wiring and key coorrect,how much for the carb setup on this 95cc,Im kinda on a budget due to surgury bills after spill

I shot you a PM

Has this been spoken for or is it still a available??

where are you located?

sent you a pm,check on its way