LinkBack URL
About LinkBacksdoes anybody know where to find the rubber bushing in the front of the swingarm i cant seem to find any body that sell them?!
110cc
does anybody know where to find the rubber bushing in the front of the swingarm i cant seem to find any body that sell them?!
1974 ct70 orange auto
1971 ct70h orange
1990 suzuki lt500R quadzilla "the beast"
2003 kawasaki z1000
1996 polaris xcr 600/3
02 yamaha wolverine
" go dirty or go home"
Moderator
www.monkeybike.co.ukOriginally Posted by dano
they have them. You may have to call if they aren't on the website. They will be listed under the "Dax" parts.
50cc
Anybody know how to get these bushing out? These and the steering bearing races are the only things holding this baby back from being powder coated!!
120cc
Pineapple,
I have had these pushed out by my local Honda dealership. There has also been on situation, where they didn't get removed before powdercoating and they are fine??? You can order from Vintage Honda Elsinore CR125/CR250 and MR50 parts | QA50 parts | Z50 parts | CT70 parts | SL70 parts | XL70 parts | XR75 parts | XR80 parts | Seat Foam
50cc
Hey thanks. I think I'll make a trip to the dealership and see what they can do. How about the steering bearings? I'll be replacing them with the newer sealed bearings, but can't for the life of me get the old races out.
120cc
If they are the stock ball bearing races they can be knocked out with a socket, extention, and hammer through the neck from the opposite side. They are expendable, since you're going with a tapered bearing set up.
1970 CT70HK0 Candy Emerald Green (restored)
1972 CT70HK1 Candy Ruby Red (restored)
1973 CT70K2 Candy Topaz Orange (Grandfather's original)
1974 CT70K3 Candy Topaz Orange (low mileage original)
1974 CT70K3 Candy Riviera Blue (restoration-in progress)
Posting Permissions
Reply With Quote