If Im wrong stating this go ahead and set me straight,My motors run ok but believe they can do more.So heres my question At the F mark on the flywheel points start to open,when flywheel reaches T mark it TDC and both valves are closed,why then does it appear the points open more after passing the T mark,in other words shouldnt the lobe be its highest at T mark.Will a points setting be at its highset opening at T mark,mines not,does anyone set points differently than the manual reccommends,gap settings.Could I put lobe on flywheel at max opening of points and set at ,024-,026 ,seems like there should be a more exact waqy of setting these,Im sure the wizards here have some secrets to share,Thanks Guys Greg